Privacy Policy
Privacy NoticeWe know that you care how information about you is used and shared and we appreciate ...More
Return Policy
You may return most new, unopened items for a full refund within 30 days of delivery. These items ...More
Terms of Use
TERMS AND CONDITIONS OF USE Welcome to our online store. We are pleased to provide you with the ...More
POWER COMMANDER V (Dynojet)
|
|||
|
Starting at $369.95 |
|||
- Features
- Request Information
- Send to a Friend
- Analog input allows user to install any 0-5 volt sensor
- Build an adjustment table based on analog input such as boost or temperature
- Gear/speed input allows for map adjustment based on gear
- Two position map switching function built in
- Can add any SPST switch and toggle between two different fuel/timing maps
- Enhanced “accel pump” utility
- Made in the U.S.A.
- More tuning ranges than PCIII USB
- Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
- Ten throttle position columns
- The Power Commander III USB allowed you to add extra fuel during start-up based on “number of revolutions” of the engine
- Now the Power Commander V can read the exact engine temp through the bike’s own ECM which allows the tuner to choose how much fuel to add
- ”Warm up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
- Fuel and timing control
- Rev Xtend
- Easy to install
- USB powered from computer; 9 volt adapter is no longer needed
- Reduced size from the PCIII USB
- Cold starting on heavily modified engines should now be much more controllable and easy to adjust
- Software displays J1850 data from bikes’ stock ECU






